V1 Engineering ESP32 Devkit
V1 Engineering ESP32 Devkit
Couldn't load pickup availability
Custom V1 Engineering ESP32-DevKitC.
* This build features a genuine Espressif ESP32-Wroom-32E-N8 (8MB), as well as a genuine CP2102.
* Besides using the highest quality main chips, the extra USB UARTS have been broken out on the bottom of the boards for USB direct IO.
* Green LED to match the Jackpot CNC Controller.
* Micro-USB port.
To directly compare with an Espressif direct DevKitC, those have half the memory (4MB) of ours, no extra UARTS, and a boring red LED.
These are for projects that quality matters. If you are just messing around there is also some ESP32's using non-genuine chips, available in the v1 shop.
The board colors will vary.
Advanced - If you want to use all 8MB you will need to compile your own firmware. Here are the lines to replace.
upload_speed = 921600 board_build.partitions = FluidNC/ld/esp32/app3M_spiffs1M_8MB.csv ; For 8Meg ESP32 board_upload.maximum_size = 8388608 ; For 8Meg ESP32 board_upload.flash_size = 8MB ; For 8Meg ESP32 board_build.filesystem = littlefs monitor_speed = 115200
1/22/24 - Currently shipping the "RC" version with white PCB, small round bottom UARTS, and extra bright green LED. The LED has been topped to reduce the brightness a touch, it can be removed if you are trying to signal aircraft passing overhead. Shown in the pictures.
![V1 Engineering ESP32 Devkit](http://www.v1e.com/cdn/shop/files/PXL_20240123_025048025.PORTRAIT.jpg?v=1705980367&width=1445)
![V1 Engineering ESP32 Devkit](http://www.v1e.com/cdn/shop/files/PXL_20240123_025021180.PORTRAIT.jpg?v=1705980368&width=1445)
![V1 Engineering ESP32 Devkit](http://www.v1e.com/cdn/shop/files/PXL_20240123_025032269.PORTRAIT.ORIGINAL.jpg?v=1705980368&width=1445)
![V1 Engineering ESP32 Devkit](http://www.v1e.com/cdn/shop/files/PXL_20240123_025059195.PORTRAIT.ORIGINAL.jpg?v=1705980367&width=1445)
![V1 Engineering ESP32 Devkit](http://www.v1e.com/cdn/shop/files/PXL_20240123_025843622.PORTRAIT.ORIGINAL.jpg?v=1705980367&width=1445)